Cook's Go-To Tackle Storage System is a
revolutionary new system that converts the dead
space under the deck compartment lids of your
boat into highly usable, exceptionally
convenient storage space. These unique, new
organizers are perfect for storing spinner baits
and well as a multitude of packaged baits. When
your deck lids are open, baits stored in the
organizers may be easily taken in and out,
however, when the lids are closed, all baits are
securely locked into place keeping them tangle
free, even in rough water. The diagrams below
better illustrate how Cook's Go-To Tackle
Storage System works.
Most users can
use this installation method
INSTALLATION INSTRUCTIONS -- NO
DRILLING REQUIRED*
FOR BOATS
WITH SMOOTH FIBERGLASS UNDER THE
LIDS such as Ranger, BOATS WITH
EXPOSED METAL CHANNEL UNDER THE LIDS
such as Triton, and BOATS WITH
SMOOTH METAL UNDERSIDES OF LIDS such
as Rebel you can use 3m double sided
tape (3m brand Scotch exterior
mounting tape #4011T)...red label
(not included with package). Clean
both surfaces with alcohol, apply
tape to the Cook's Tackle System,
then to your mounting surface This
method is not recommended for
underside with carpet or foam
padding.
|
INSTALLATION INSTRUCTIONS -- Pro's
Soft Bait Glue*
For those
of you who prefer not to drill into
your boats, Pro's Soft Bait Glue, a
great product for your soft plastic
baits, is also a quick and easy way
to mount your Cook's GO-TO Tackle
Storage System. This glue may be
purchased from
www.prosoftbaitglue.com/.
See installation instructions.
Mounting
instructions for using the Pro's
Soft Bait Glue:
-
Lightly sand mounting area,
clean with alcohol.
-
Lightly sand mounting surface of
Cook's GO-TO Tackle Storage
System.
- Be
sure you have clearance for
racks and baits.
- Be
sure you have the Cook's GO-TO
Tackle Storage System where you
want it--once in place, it
cannot be moved.
-
"Lightly" apply the Pro's Soft
Bait Glue onto the Cook's
- GO-TO
Tackle Storage System and mount
to surface.
* Pro's
Soft Bait Glue Sold Separately.
|
(Mounting Hardware Included)
Alternate
Installation Method
(Mounting Hardware Included)
|
NOTE:* It has
been brought to our attention that
many people really like our Tackle
Storage System, but when it comes to
drilling the 11/64" diameter holes,
and installing the two #6 screws
they are very concerned that the
screw heads will be visible. We
intentionally downsized the mounting
screws to a #6 screw so the head
would be small & disappear in the
carpet when tightened. If the
instructions on the package card are
followed this will not be a problem.
Pick the carpet fibers out from
under the screw head prior to
tightening the screws, then as the
screws are tightened the rubber
backing of the carpet will yield and
the fibers will pull over the screw
heads concealing them very well.
This rubber backing will also seal
the screw from any leakage from
rain.
|
